Products protected by the

following U.S. Patents:

DES - 376,280

DES - 342,843

DES - 477,935

DES - 324,140

The assembly process is very simple and should only take a few minutes to set up. We suggest that you save the original cartons for future transportation. It will further protect your stands and save you valuable time and energy looking for cartons that more than likely will not fit.

With the descriptive instructions on this page you can learn to assemble your Little Black Box quickly and easily. Any questions or comments will gladly be accepted by giving us a call. We look forward to doing more business in the future.

Little Black Box Assembly
1.  View of completed inside of top and base.  Click to enlarge image for greater detail.
2.  Install lock bar with # 8 nuts & bolts. Secure with screwdriver and small pair of pliers or small wrench.  Click to enlarge image for greater detail.
3.  Install Billboard graphic in plastic lens , (8" high x 10" wide). Secure to box with " long U - Bolt with 2 nylon washers on top and 2 wing nuts secure from underneath the top.  Click to enlarge image for greater detail.
4.  Install completed billboard. Easy way is "upside down"; simply install 2 nylon wing nuts underneath the top. Click to enlarge image for greater detail.
5.  Little Black Box ready to go. Install top, lock, secure pens, polish clean, and put it to work! All you need is a good location, lead box, lead slips, and working pens. Make sure you visit your Silent Salesmen often to see if anything is needed for production.  Click to enlarge image for greater detail.