Products protected by the

following U.S. Patents:

DES - 376,280

DES - 342,843

DES - 477,935

DES - 324,140

The assembly process is very simple and should only take a few minutes to set up. We suggest that you save the original cartons for future transportation. It will further protect your stands and save you valuable time and energy looking for cartons that more than likely will not fit.

With the descriptive instructions on this page you can learn to assemble your Contest Box quickly and easily. Any questions or comments will gladly be accepted by giving us a call. We look forward to doing more business in the future.

Contest Box Assembly
1.  Place the box on the base unit and attach with bolts and washers provided. Hand tighten or use pliers if necessary.  Click to enlarge image for greater detail.
2.  Installing bolts and washers inside Contest Box.  Click to enlarge image for greater detail.
3.  Install lock bar with #8 bolts and nuts. Tighten with screwdriver and pliers.  Click to enlarge image for greater detail.
4.  Place the key locking table top on top of base unit, after installing billboard to the table top.  Click to enlarge image for greater detail.
5.  Install the billboard to the locking table top with the U-Bolt and nylon cushion washers. Click to enlarge image for greater detail.
6. Attach the nylon wing nuts to the u-bolt holding the billboard to the table top. Click to enlarge image for greater detail.